Saniflo SaniBEST Pro Macerating Upflush Toilet with Alarm & Descaler
Availability: In stock- ships same day
Shipping: FREE SHIPPING 2-5 Days UPS
Tax: No Sales Tax save up to 10%
Type: Macerating Upflush Toilet
Product #: 013, 005, (083 or 087)
Ideal Use: Full Bathroom Addition
Features and Benefits:
- Pumps vertically up to 25 ft
- Connects a washing machine, toilet, sink, shower and/or bath
- Easy Installation
SaniBEST Pro macerating pump, tank and bowl plus FREE soft-close Toilet Seat!
Bowl Size: standard bowl or elongated (ADA compliant) bowl
Extension Pipe: for behind the wall installation
SaniALARM: warns if water level in macerator is unusually high
Descaler: cleaner, removes hard water deposits in macerator
Specifications & Installation Manual:
The SaniBEST Pro is a system that is used to install a complete bathroom up to 25 feet below the sewer line, or even up to 150 feet away from a soil stack. The SaniBEST Pro can handle the effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection).
While most of our pump range consists of shredders/macerators, the SaniBEST Pro incorporates an actual grinder system. The SaniBEST Pro is ideal for situations where you do not control the use of it (ie. rental unit, offices, warehouses, etc).
The SaniBEST Pro is designed to deal with sanitary napkins that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
All-around Bathroom Addition
The Saniflo SaniBEST Pro Macerating Upflush Toilet kit connects to any sink, bath, toilet and washing machine. Its extension pipe facilitates behind-the-wall installation, and the discharge elbow rotates 360 degrees to fit diverse installation requirements and can utilize either a standard or elongated bowl.
Suitable for Commercial Environments
For areas with high-traffic public and commercial usage, this kit is perfect. This system requires minimal monitoring, unlike other pumps that utilize shredders and macerators, and the grinder system feature crushes sanitary napkins instead of flushing them in the toilet. The crushed solid waste collects at the bottom of the unit for ejection by the impeller.
Once installed, contractors easily access the kit's components via a service panel during repairs or maintenance. No disconnection required.
No Waste Overflow
To minimize water usage and spilling of waste, the Saniflo SaniBEST Pro Macerating Upflush Toilet has an alarm that goes off whenever the water levels exceed the required limit.
Note: In commercial installations, plumbing codes require an elongated bowl (ADA) to be installed with this system.
How It Works: Saniflo Instructional Video
Warranty: 2-Year Full Manufacturer Warranty
Extended 3-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works:
How It Works:
The inside of the SaniBEST Pro comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel cutting blade and the pump. When the flush is activated, the water flowing into the SaniBEST Pro activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter, enter the chamber and are reduced to slurry as the blades rotate at 3600 RPM. The reduced solids are picked up at the bottom and the impeller mounted beneath the motor ejects the waste.
The unit pumps the effluent upward to 25 feet and/or 150 feet horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates. A normal operating cycle for the SaniBEST Pro takes about 10 - 15 seconds depending upon the discharge pipe run configuration.
In addition, the SaniBEST Pro will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a bath/shower, a urinal and even a washing machine (indirect connection). When adding a bathtub/shower, a base will have to be constructed. This base should be made out of a 2" x 6" (minimum) or 2"x 8" (recommended) on edge, to allow for the installation of a P-trap and the required 1/4" per foot gravity flow towards the pump unit.
The waste water from other sanitary fixtures is discharged into the SaniBEST Pro via two 2-inch inlets on either side of the housing. The discharge elbow on top of the SaniBEST Pro can be rotated 360 degrees depending on the discharge installation. A non-return valve (included in assembly) prevents back flow into the unit.
This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system.
Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems. It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.
Periodic maintenance can be accomplished easily without having to disconnect the unit from either the toilet or the rest of the plumbing system. Through a service panel, a service contractor can easily access the electrical components as well as the level sensor mechanism of the pump. The SaniBEST Pro unit must be connected to our rear discharge toilet. This system uses much less water than a regular toilet.
Plumbing Code Certified:
The SaniBEST Pro has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9.