Product Description: The SaniSWIFT is a gray water pump that is suitable for use in a basement apartment or anywhere in the house where additional fixtures are most wanted. It will pump the waste water away from a variety of sources such as: a kitchen sink, laundry sink, washing machine (indirect connection), dishwasher, bar sink, etc.
The SaniSWIFT's modern style prevails over other bulky relics. This system offers powerful and economical pumping action in a compact, contemporary design. With unprecedented performance and features, this pump is unmatched in its class.
Installs Easily with Different Water Sources
This unit will discharge wastewater from a sink, urinal, dishwasher or other appliance with similar volumes of wastewater. It can also be used with a washing machine via an indirect connection and with a shower when used in conjunction with a P-trap and the required 1/4" per foot gravity flow.
Vertical Pumping up to 14 Feet
The SaniSWIFT gray water pump makes your dream of refinishing or furnishing a basement a reality. The unit carries waste water away from any space in the house that's up to 14 feet beneath the main water line.
Horizontal Pumping up to 140 Feet
The powerful SaniSWIFT gray water pump pushes effluent out along the horizontal plane for an entire 140 feet. The unit easily connects the shower, sink, dishwasher or other appliances in a guest house to your home's main drainage lines.
Modern, Energy Efficient Design
The SaniSWIFT gray water pumps away wastewater and effluent without having your utility bills shoot through the roof with the entire cycle taking between only two and 10 seconds. The unit's motor is sealed in an oil filled enclosure that is activated by a pressure switch and only operates when the proper water level threshold has been surpassed.
Warranty: 2-Year Full Manufacturer Warranty Extended 3-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works: The inside of the SaniSWIFT is comprised of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the pump.
When the water enters the SaniSWIFT, it activates a pressure switch which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum.
The unit pumps the effluent upward to 14 feet and/or 140 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the pressure switch deactivates the unit until water enters the unit again. A normal operating cycle for the SaniSWIFT can be as short as 2 - 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. In addition to a sink, the SaniSWIFT will also accept and discharge the waste water from a variety of other sanitary fixtures such as: a kitchen sink, a shower, a urinal. When adding a shower, a base will have to be constructed.This base should be made out of a 2" x 6" (minimum) or 2" x 8" (recommended) on edge, to allow for the installation of a P-trap and the required 1/4" per foot gravity flow towards the pump unit.
The waste water from other sanitary fixtures is discharged into the SaniSWIFT via two 1-1/2 inch inlets, on either side of the housing and an additional inlet on the top of the unit. A non-return valve, which comes already assembled on the discharge rubber connector, prevents back flow into the unit. This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. It is also highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit. The SaniSWIFT is a compact unit with attractive rounded contours that fits neatly into tight spaces.
Plumbing Code Certified: The SaniSWIFT has been certified to American and Canadian Standards. Electrical standard UL 788, CA: Electrical standard CSA C22.2.