Saniflo SaniBEST Pro | Macerating Pump ONLY
Availability: In stock- ships same day
Shipping: FREE SHIPPING 2-5 Days UPS
Tax: No Sales Tax save up to 10%
Type: Macerating Pump
Product #: 013
Ideal Use: Full Bathroom Addition
Features and Benefits:
- Pumps vertically up to 25 ft
- Connects a washing machine, toilet, sink, shower and/or bath
- Easy Installation
SaniBEST Pro macerating pump ONLY
SaniALARM: warns if water level in macerator is unusually high
Descaler: cleaner, removes hard water deposits in macerator
Specifications & Installation Manual:
The SaniBEST Pro is a system that is used to install a complete bathroom up to 25 feet below the sewer line, or even up to 150 feet away from a soil stack. The SaniBEST Pro can handle the effluent from a toilet, sink, bathtub, shower and washing machine (indirect connection).
While most of our pump range consists of shredders/macerators, the SaniBEST Pro incorporates an actual grinder system. The SaniBEST Pro is ideal for situations where you do not control the use of it (ie. rental unit, offices, warehouses, etc).
The SaniBEST Pro is designed to deal with sanitary napkins that may have been flushed down the toilet; such may consist of condoms, sanitary napkins, q-tips, dental floss, etc.
The SaniBEST Pro reduces and eliminates solid waste from the toilet and can also be used to handle the wastewater from sinks, bathtubs and the shower. With a few minor modifications, this system can also be used to remove gray water from a washing machine or dishwasher.
Pressure Controlled Activation
The Saniflo SaniBEST Pro has a finely tuned pressure chamber and no overly complicated systems are needed to reduce waste to effluent and remove it. A micro switch in the pressure chamber is activated with the inflow of water, which in turn starts up the motor. This turns the grinding mechanism, which reduces solids and disposes of them via an impeller located underneath the motor. Once the water level in the pressure chamber decreases below a certain level, the micro switch deactivates automatically. The entire process takes between 10 and 15 seconds.
Actual Grinding System with 3600 RPM Steel Cutting Blades
The SaniBEST Pro is an ideal choice for office buildings, warehouses, performance venues, rental properties and other instances where the owner or property manager is not in control. When you do not know who exactly is going to be using your facilities, and you don't know what they may try to flush down the toilet, the SaniBEST Pro has a system of steel blades that actually grinds up refuse that is deposited into the toilet bowl. This includes dental floss, cotton swabs, tampons, condoms and other items that can potentially contribute to causing a serious blockage if they are not reduced properly upon disposal.
Easily Accessible Service Panel
A cleverly designed service panel makes it easy for contractors to perform periodic servicing and have electrical components repaired. Adjustments can be made without having to disconnect this unit from the plumbing thanks.
Note: In commercial installations, plumbing codes require an elongated bowl (ADA) to be installed with this system.
How It Works: Saniflo Instructional Video
Warranty: 2-Year Full Manufacturer Warranty
Extended 3-Year Warranty with Product Registration (www.Saniflo.com/Register)
How It Works:
How It Works:
The inside of the SaniBEST Pro comprises of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel cutting blade and the pump. When the flush is activated, the water flowing into the SaniBEST Pro activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A common spindle/shaft drives the impeller and the blades. The moving parts therefore are kept to an absolute minimum. Water and organic waste matter, enter the chamber and are reduced to slurry as the blades rotate at 3600 RPM. The reduced solids are picked up at the bottom and the impeller mounted beneath the motor ejects the waste.
The unit pumps the effluent upward to 25 feet and/or 150 feet horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates. A normal operating cycle for the SaniBEST Pro takes about 10 - 15 seconds depending upon the discharge pipe run configuration.
In addition, the SaniBEST Pro will also discharge gray water from a variety of other sanitary fixtures such as: a sink, a bath/shower, a urinal and even a washing machine (indirect connection). When adding a bathtub/shower, a base will have to be constructed. This base should be made out of a 2" x 6" (minimum) or 2"x 8" (recommended) on edge, to allow for the installation of a P-trap and the required 1/4" per foot gravity flow towards the pump unit.
The waste water from other sanitary fixtures is discharged into the SaniBEST Pro via two 2-inch inlets on either side of the housing. The discharge elbow on top of the SaniBEST Pro can be rotated 360 degrees depending on the discharge installation. A non-return valve (included in assembly) prevents back flow into the unit.
This unit has been designed with a vent connection on the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent. The use of mechanical vents, air admittance valves or similar devices are not permitted as these are considered one-way air vent systems. It is highly recommended for the system to be connected to a Ground Fault Interrupter (GFI) circuit.
Periodic maintenance can be accomplished easily without having to disconnect the unit from either the toilet or the rest of the plumbing system. Through a service panel, a service contractor can easily access the electrical components as well as the level sensor mechanism of the pump. The SaniBEST Pro unit must be connected to our rear discharge toilet. This system uses much less water than a regular toilet.
Plumbing Code Certified:
The SaniBEST Pro has been certified to American and Canadian Standards. Macerating standard; US: CSA Certified & IAPMO (UPC) listed - ASME A112.3.4, CA: Macerating Standard CSA B45.9.